Ignition/Water Pump Drive Parts |
Fitting Info'/Pdf |
Part Number |
Pre Production Price |
Shop Link |
Price |
Ignition Case. Type 1.
|
In Stock. |
1131 XR1105 |
N/A |
|
£200.00 |
Ignition Case. Type 2.
|
In Stock. |
1131 XR1103 |
N/A |
|
£200.00 |
Ignition Cover. Also the same as Early RG500's
 
|
3 x M5 x 16mm Screws.
In Stock. |
11324 XR1103 |
N/A |
|
£85.00 |
Rubber Grommet Only.   |
In Stock. |
13116 XR1104 |
N/A |
 |
£26.00 |
Ignition Case (Type 1), Cover and Rubber Grommet Kit.
 
|
In Stock. |
1131 XR1105 11324 XR1103 13116 XR1104 |
N/A |
|
£310.00 |
Ignition Case (Type 2), Cover and Rubber Grommet Kit.
 
|
In Stock. |
1131 XR1103 11324 XR1103 13116 XR1104 |
N/A |
|
£310.00 |
Water Pump and Rev Counter Crank Gear (Requires tapered Sleeve to fit GT Crank).Will fit directly onto TR Crank.  |
In Stock. |
1129 XR1103 |
N/A |
|
£130.00 |
Water Pump Shaft Gear (Shaft not supplied Requires Pressing onto GT/TR standard Shaft)   |
In Stock. |
1130 XR1103 |
N/A |
|
£110.00 |
Tapered Sleeve for GT Crank.  |
Rotor Brg Carrier Ig |
BDK01 XR1112 |
In Stock |
|
£80.00 |
Bearing For Ignition Case |
|
|
N/A |
|
£8.08 |
Seal for Ignition Case |
|
|
N/A |
|
£5.04 |
Extractor for Sleeve.  (Pic to follow) |
In Stock. |
BDK02 XR1114 |
N/A |
|
£30.00 |
Gears and Sleeve Kit (includes Bearing, seal and keys) |
In Stock. |
|
N/A |
|
£300.00 |
Gears and Sleeve Kit.  |
In Stock. |
|
N/A |
|
£290.00 |
Ignition Case Kit. Everyting less programable ignition.
|
|
|
|
|
|
Keys for Sleeve. (Each, 3 required). |
In Stock. |
|
|
|
£1.20 |
Ignition Rotor.  |
In Stock. |
BDK03 XR1112 |
N/A |
|
£85.00 |
Ignition Rotor Retaining Nut, Alloy 7075T6, clear anodised.
For our Rotor( as Above). |
In Stock.
|
BDK04 XR1112 |
N/A |
|
£25.00 |
Ignition Rotor Retaining Nut, Alloy 7075T6, clear anodised.
Electrex/HPI Ignition. |
In Stock. |
BDK05 XR1112 |
N/A |
|
£40.00 |
Ignition Rotor Extractor.  |
In Stock. |
|
N/A |
|
£40.00 |
Pick Up Plate and Rotor with pick up coils.   |
In Stock. |
BDK06 XR1112 |
N/A |
|
£240 |
Electrex/HPI Mounts for LHS fitment to TR Casing. (You need to send in your Rotor for Keyway cutting) without a keyway it is a pain to put it back on in the same place, and will always need re timing. (Keyway cutting included in price) Does not include casing. Option to Add Water Water Pump Drive Gears.   |
In Stock.
|
|
N/A |
|
£220.00
With Gears £450.00 |
Ignition System, with Coils, Leads, Caps, pick up plate, pickups, rotor, hand held programmer. Runs from 12v supply. |
In Stock. |
|
N/A |
|
£703.40 |
Complete Ignition Kit. Everything needed, inc casing, gears, Ig system etc. |
|
|
|
|
|
Other Parts. |
Fitting Info' |
Part Number |
Pre Production Price |
Shop Link |
Price |
TR 750 Front Water Plug (Uses Standard 'O' Ring ) 6082T6 Clear Anodised |
|
BDK07 XR1113 |
In Stock. |
|
£20.00 |
TR 750Lower Water Plug (Includes 'O' Ring ) 6082T6 Clear Anodised |
|
BDK08 XR1113 |
In Stock. |
|
£25.76 |
TR 750 Top Water Manifold (With 'O' Ring )
    |
Includes 1mm section O Ring, can also use std gasket. If using O ring, head face must be good. |
11371 XR1103 |
In Stock. |
|
£68.00 |
TR 750 Throttle Assy's
.jpg)
|
Includes, Cable adjusters, Alloy Bolts and Suzuki R+L Grips. |
Top 11348 XR1105 Btm 11358 XR1105 Tube 11368XR1105 |
In Stock. |
|
£280.00 |
RG 500 Throttle Assy's
.jpg) .jpg)  .jpg) |
Includes, Cable adjusters, Alloy Bolts and Suzuki R+L Grips. |
Top 57126 42000 Btm 57131 42000 Tube 57130 42000 |
In Stock. |
|
£280.00 |
TR750 Water Pump Cover, these are deeper for a taller impeller.
 
|
|
17411 XR1100 |
In Stock. |
|
£105.00 |
TR750 Water Pump Cover, and impeller kit, will fit standard shaft.
 |
|
|
In Stock. |
|
£175.00 |
TR750 Water Pump impeller.
|
|
|
In Stock. |
|
£85.00 |
TR750 Clutch Top Pressure Plate. (Both Types)
  
|
|
|
In Stock |
|
£140.00 |
TR750 Titanium Clutch Nuts Set of 8. (Back of outer Basket to Drive Plate)
|
In Stock |
|
N/A |
|
£35.00 |
TR750 Clutch Outer Basket, 7075T6 Hard Anodised in Black.
|
|
|
In Stock |
|
£300.00
(£500.00 Both Inner and Outer Baskets). |
TR750 Clutch Inner Basket, 7075T6 Hard Anodised in Black. The first and second pictures are both Inner and Outer part machined.
  
|
In Stock..
|
|
N/A |
|
£300.00
(£500.00 Both Inner and Outer Baskets). |
TR750 Clutch Drive Plate.
 
|
Finally Finished!.
In Stock.. |
|
N/A |
|
£240.00 |
TR750 Primary Drive Gear for Dry Clutch 84T (Clutch Gear)
 
|
Finally Finished!.
In Stock.. |
|
N/A |
|
£280.00 |
TR750 Primary Drive Gear for Dry Clutch 54T (Crank Gear)
 
|
Finally Finished!.
In Stock.. |
|
N/A |
|
£220.00 |
TR750 Primary Dry Clutch Inner Cover.
|
Finally Finished!.
In Stock.. |
|
In Stock |
|
£600.00 |
TR750 Dry Clutch Lifter Assy complete with gears,Bronze bushes cable arm, spring etc.
|
Finally Finished!.
In Stock.. |
|
In Stock. |
|
£411.90 |
TR 750 Clutch Lifter Casting.
 
|
Finally Finished!.
In Stock..
, |
11340 XR1105 |
In Stock. |
|
£160.00 |
TR 750 Clutch Lifter Bushes.
 
|
Top Bush.
|
|
|
|
£18.00
|
TR 750 Clutch Lifter Rack. Note two Different Lengths available,
|
Finally Finished!.
In Stock.. |
|
|
|
£54.00 |
TR 750 Clutch Lifter Shaft.
|
Finally Finished!.
In Stock.. |
|
|
|
£81.60 |
TR750 52mm Titanium Cylinder Bolts (4 Required)
|
In Stock. |
Set |
N/A |
|
£40.00 |
TR750 40mm Titanium Cylinder Bolts (4 Required)
|
In Stock. |
Set |
N/A |
|
£38.00 |
TR750 Aluminum Head Bolts Set 11. 7075T6 Hard Anodised in Black
|
In Stock. |
Set |
N/A |
|
£80.00 |
TR750 10mm Titanium Cylinder Studs Set (12 Pcs), Including short base stud.
   
|
In Stock |
11389 XR1102 |
N/A |
|
£140.00 |
TR750 Set of Main Casing Bolts Titanium Gr5, Flanged Head, with Al Washers.
   
|
In Stock |
BDK CBolts XR1105 |
Run Tap thro all threads, casing thread depth varies. |
|
£229.15 |
TR 750 Front Disc Carrier, First 2 Pictures are our solid Models, last one is original with welded spar.
    |
In Stock |
11313 XR1103 |
|
|
£140.00 |
TR 750 Front Disc Carrier, with Bolted on Disc. (Original). High quality ductile SG Iron.
|
Finished |
11318 XR1106 |
N/A |
|
£240.00 |
TR 750 Front Disc Carrier, with Floating+Drilled Disc. High quality ductile SG Iron
.jpg) |
Finished |
11318 XR1106/F |
N/A |
|
£265.00 |
About Pre production Price.
This is the price we will sell the parts for before we have them ready for sale. These are parts we have already had a few samples of, and have machined, checked and tested suitability. We are offering the oportunity to buy these parts at a reduced price to help us finance the next patterns and tooling for further parts. The idea is to help everybody, you get the parts at reduced price and this also enables to get on with further development. There will obviously be a delay of 6/8 weeks, however we will try to keep people informed on this page when we have approximate dates for completion of these parts.
Note, the Pre Production Price only applies to those that pay for the parts before they are finished. When they are in stock the price will be at the higher level.
About Us
BDK was established in 1987. Over the past 20++ years we have been involved with many interesting projects and have built up a good reputation in many forms of motorsport. Our main forte is motorcycle engineering but we also build race engines for Speedboats and have turned our hand to many a fascinating project over the years whether it be motorcycle or not.
Started European Classic Racing about 5 years ago, with much success. See "The Team and Our Projects" page for more info.
Services
Amonsgt all the specialist services, parts and jobs listed around the website below is a selection of other services we supply. Please contact Sam for more info.
- Reboring
- Engine rebuilds (2 and 4 stroke)
- Crankshaft Rebuilds (2 stroke)
- Carbon Fibre parts
- Custom machining with in house services including CNC mill/CADCAM facilities
- All forms of welding, titianium, stainless, aluminium etc
- Valve seat/guide replacement/manufacture
- Race Preparation
- Tuning 2 and 4 stroke
- 33bhp Restriction kits custom made, fitted and certificate supplied
- Quad bike restriction and certificate for road use purposes
- Spare parts aftermarket and genuine
- A good cup of tea!
|
